top of page


Multi-Fiber Benchtop Cleaver (Pre-Polish)

The fibersect is designed to cut all epoxied ferrules and connectors.  It improves throughput and first pass yield by eliminating manual steps and human variables.  The fibersect.multi2 also minimizes polishing and provides a precise and reliable outcome. The end result is significant savings in production.


  • Optimized to quickly cut through the large amount of epoxy and the many fibers of the 4 to72 fiber MT ferrules and large diameter (>300 micron) fibers used with the SMA connector.

  • Cuts parallel to the ferrule face whether the face is at 0° (flat) or at 8° angle (APC).

  • • Recommended adapters: MT, MT-APC, and SMA with fiber diameter of 300-2000 µm 

  • Custom adapters are available

  • Cut cycle time: <1 sec for MT and MT-APC ferrules; <4 sec for SMA connectors with 1000 µm fibers • Recommended cut length from ferrule face: 100 µm for MT and MT-APC; 150 µm for SMA connectors 

  • Adjustable cut length from ferrule face: 0-600 µm; 5 µm adjusting resolution • Maximum fiber protrusion from ferrule face before cutting: 10 mm •

  • Cut angle: <+/- 0.5° • Adapter changeover time: <30 sec • Warranty: One year •

  • Expected saw lifetime: > 600,000 cuts when cutting 12-fiber epoxied MT ferrules •

  • Power: 100-240 Vac, 50-60 Hz, 0.48 A; with rechargeable battery •

  • Battery capacity: >400 cuts when cutting 12-fiber epoxied MT ferrules •

  • Dimensions: W x D x H / 3.75 x 5.25 x 3.50 in / 95 x 133 x 89 mm • Weight: 2 lbs / 0.9 kg


fibersect MT.JPG
  •  Improves throughput and first pass yield by eliminating manual steps and reducing human variables, thereby minimizing polishing, maximizing reliability and precision, and producing significant savings in production.

  • Small footprint, lightweight, portable, battery powered 

  • Fast, easy cut length adjustment 

  • Quick adapter change

  • Safely collects cutting waste

  • Quickly produces a flat cut very close to the ferrule face, presenting the ideal surface to start polishing and markedly improve polished end face geometry.​

  • Simple, One-button operation provides exceptional versatility, portability, and ease of use.


  • Minimal Operator Training for easy labor management in a high turnover environment

  • "Good input, Good process output" - Consistent cut height produces even distribution of polishing pressure resulting in higher first pass yields that impact down stream processes. 

    • Eliminates variable ferrule heights to start polishing

    • Reduction in scrap and rework (zero operator dependent)

    • Potential improvement in Geometry, Insertion Loss and Visual Inspection Yield

    • Reduction in Polishing time saves labor and increases throughput

We stock a wide range of ferrule and connector adapters for quick delivery. We also can provide custom adapters based on your needs.

Other options include:

  • Vacuum waste collector

  • Cut counter

  • Footswitch actuator

  • Stand options

Click below to review our complete product listing

fibersect.multi2 Ordering Guide


Part Number  Description

PNX-FS-02  fibersect®multi.2, requires customer selected adapters


Part Number  Description

PNX-FSC-VDC   Vacuum dust collector (110V

PNX-FSC-VDC-220  Vacuum dust collector (220V)

PNX-FSWITCH  Foot switch

PNX-STD-ADJ  Adjustable stand

PNX-STD-FLD  Folding stand


Part Number  Description

PNX-AF-MT MT (flat, 0°) Ferrule Adapter

PNX-AF-MTAPC  MT APC (pre-angled, 8°) Ferrule Adapter

PNX-AF-TMT  US Conec TMT (APC) Ferrule for MMC Connector



PNX-AF-QMT  Radiall Q-MTitan™ - ARINC 846

And Many More Types Are Available - Click Below for the Full Listing

Phenix Fiber Optics was founded in 2005 in Bozeman, Montana, and is leading innovation in fiber optic instrumentation. Our President, Roger Robichaud, has been a pioneer in fiber optic evolution for over 40 years. In 1978, Roger founded Orionics, the first manufacturer of fusion splicers and OTDRs in the US. Our mission at Phenix Fiber Optics is to achieve excellence without compromise in fiber optic instrumentation and our method is one of attending to the highest level of detail, both in development and design.  For more information on Phenix FO and their products please visit

fibersect® is a registered trade mark, and fibersect.multi2™ and fibersect.single™ are trade marks of Phenix Fiber Optics.

SN® is a registered trade mark of Senko Advanced Components.

Q-MTitan™ is a Trademark of Radiall.

Visit Us @ Booth # 5102
Jan. 30-Feb. 1 , 2024
Mascone Center, San Francisco, CA

bottom of page