top of page


The Phenix Fiber Optics fibersects are designed to cut all epoxied ferrules and connectors, including the LC and SC using 125 μm fibers, the 4-72 fiber MT ferrules and SMA connectors with fibers up to 2000 μm in diameter. To achieve the best results with a fast cutting time and maximum saw lifetime, two distinct fibersects are now available: the fibersect.multi.2 and the fibersect.single. They both share a new cutting configuration that provides the smoothest cut possible, permitting a closer cut to the ferrule face and producing the ideal surface for polishing. The fibersect.single contains a finer saw, optimized for cutting smaller diameter epoxied fibers, while the fibersect.multi.2 uses a coarser saw best suited for cutting large diameter SMA fibers and 4-72 fiber MT ferrules.

Fibersect.multi: About Us


  • Quickly cuts through the epoxy and fiber of all ferrules and connectors, including MT ferrules and MPO connectors, SC, LC, LC Duplex, FC, SMA, ST and MU. Cuts parallel to ferrule face at 0° (flat) or 8° angle (APC).

  • In just seconds, produces a flat cut very close to the ferrule face, presenting the ideal surface for polishing and markedly improving end face geometry.

  • Improves throughput and first pass yield by eliminating manual steps and reducing human variables, thereby minimizing polishing, maximizing reliability and precision, and producing significant savings in production.

  • One-button operation, battery power, and small footprint provide exceptional versatility, portability, and ease of use

Fibersect.multi: Our Technology


  • Processing time: 1-4 s

  • Ferrule/Connector adapters: MT 0°/MT 8°/LC/LC-APC/LC-Duplex/SC/SC-APC + others MT ferrule capabilities: 4 to 72 fibers

  • Adapter changeover time: 30 s

  • Allowable fiber protrusions from ferrule: 0 to 10 mm

  • Cut length: adjustable, 0-600 μm from face of ferrule

  • Cut flatness: +/- 10 µm

  • Options: vacuum dust collector, cut counter, foot switch

  • Power supply: 100-240 Vac, 50-60 Hz + rechargeable battery powered

  • Dimensions (W x D x H): 4.25 x 5.75 x 3 in. (108 x 146 x 76 mm) Weight: 2 lbs (0.9 kg)

Fibersect.multi: Text

Model Information

Main Body Unit, Accessories Sold Separately





Fibersect.multi: Press Kit



MT (flat, 0°) Ferrule Adapter

Part Number

MT APC (pre-angled, 8°) Ferrule Adapter

Part Number:  PNX-MTFC-AD-8

LC Adapter

Part Number:  PNX-AC-LC

LC Duplex Adapter

Part Number PNX-AC-LC-D

SC Adapter

Part Number: PNX-AC-SC

FC Adapter

Part Number: PNX-AC-FC

ST Adapter

Part Number: PNX-AC-ST

SC/APC Adapter


LC/APC Adapter

Part Number:  PNX-AC-LCA

1.25mm Ferrule Adapter

Part Number:  PNX-AF-LC

SMA Adapter

Part Number: PNX-AC-SMA

Don't see what you are looking for here?   Please contact us and let us know about your application. Chances are we have a solution already or we can design one.


Optional Accessories

Vacuum dust collector (110V)

Part Number:  PNX-FSC-VDC

Cut Counter

Part Number:  PNX-CTR-6D

Foot Switch

Part Number:  PNX-FSWITCH

Adjustable Stand

Part Number:  PNX-STD-ADJ

Folding Stand

Part Number:  PNX-STD-FLD

Blade Servicing

Replacement saw assembly

Part Number:  PNX-MTFC-MA01

Saw, factory replacement

Part Number:  PNX-FSC-SFR

fibersect MT.JPG
Fibersect.multi: Our Technology

Phenix Fiber Optics was founded in 2005 in Bozeman, Montana, and is leading innovation in fiber optic instrumentation. Our President, Roger Robichaud, has been a pioneer in fiber optic evolution for over 40 years. In 1978, Roger founded Orionics, the first manufacturer of fusion splicers and OTDRs in the US. Our mission at Phenix Fiber Optics is to achieve excellence without compromise in fiber optic instrumentation and our method is one of attending to the highest level of detail, both in development and design.  For more information on Phenix FO and their products please visit

fibersect® is a registered trade mark, and fibersect.multi2™ and fibersect.single™ are trade marks of Phenix Fiber Optics.

Fibersect.multi: Text
bottom of page